The US solar manufacturing landscape in 2026

Nov 18, 2026 - 10:38
0
The US solar manufacturing landscape in 2026

There is a group of about 40 companies that are actively producing silicon PV components in the United States, from polysilicon to modules, each with a different growth model out to 2030. While the landscape remains somewhat fragmented, there are signs that a consolidated production-led approach could emerge in the coming years, particularly if the sector can unite on a technology roadmap and the need for a domestic materials-based supply chain.

The starting point to understand the US solar PV manufacturing landscape is the capital expenditure (capex) committed by the different companies active in the sector. Capex forms the basis of the investments into new factories and production equipment, ultimately creating the basis of future production activity.

The capex trends from 2020 to 2026 reveal a clustering into specific states or regions that have been prioritized by domestic solar manufacturers. This is shown in the chart below, with the key spending regions for 2026 segmented to assess the future growth potential in production volumes from 2027 onwards.

Texas is the leading state for PV capex in 2026, with key contributions from Canadian Solar’s module expansion in Mesquite, near Dallas, the build-out of the new manufacturing base by SpaceX in Bastrop, east of Austin, SEG Solar’s new module base at Tomball, northwest of Houston, and T1 Energy’s new cell factory outside of Austin. Collectively, these four companies make up about 90% of the total PV capex in Texas during 2026, with nine other entities contributing to the residual Texas capex total.

The next major spending region in 2026 is the Carolinas. This is driven by Boviet Solar’s spending on its cell factory in Greenville, North Carolina, First Solar’s new module assembly factory in Gaffney, South Carolina, and ES Foundry’s cell expansion in Greenwood, South Carolina. An additional six companies have meaningful capex allocations in the Carolinas during 2026, with the most significant coming from early spending from Suniva for its new cell factory in Laurens, South Carolina.

The next region of spending activity segmented in the chart comes from other companies allocating capex to sites across other Southeastern states. This zone includes First Solar’s existing factories in Trinity, Alabama, and New Iberia in Louisiana that were built out mainly during 2023 to 2025. Qcells’ ingot-to-module Cartersville base northwest of Atlanta, Georgia, also falls into this segmented territory, with the spending by Qcells also concentrated in the period from 2023 to 2025. Another six companies contribute to the 2026 capex levels, but at much lower levels of spending.

The final region of capex significance spans the Midwest states of Indiana, Michigan, and Ohio. Spending here is led by Canadian Solar’s new cell factory in Jeffersonville, Indiana, alongside Corning’s ongoing capital deployment across the company’s co-located polysilicon and ingot/wafer manufacturing bases in Saginaw County, northwest of Detroit, Michigan. Other contributions in 2026 come from First Solar’s spending at its three-plant manufacturing cluster south of Toledo, Ohio, adjacent to Perrysburg Township and Lake Township.

Module clusters

While the long-term goal of capex into US solar manufacturing is to develop all stages in the value-chain, the major investments since the introduction of the Inflation Reduction Act in 2022 have been into module assembly facilities. Therefore, a detailed regional analysis of production activity in the United States is today confined to module. This is likely to change in the coming years, but will depend ultimately on the capex allocated to silicon cells and ingots/wafers during 2027 and 2028. This is shown on the chart below.

During the past couple of years, module production volumes in the United States have been increasingly dominated by Texas, from Canadian Solar in Mesquite, T1 Energy’s Wilmer plant south of Dallas, SEG Solar’s two module bases outside Houston, Imperial Star’s Tomball factory north of Houston, Waaree Energies in Brookshire west of Houston, TOYO in Humble, northeast of Houston, and Elin Elektrik’s Sirius Solar operations in Brookshire.

About 95% of solar module production in Texas during 2026 is forecast to come from factories located in a 50-mile radius within the Greater Houston region and a 25-mile radius within the Greater Dallas region, representing more than one-quarter of all module production in the United States.

The other major state for module production is Ohio. In contrast to the activity in Texas across a range of different companies, module production in Ohio is almost exclusively coming from First Solar’s thin-film lines and Illuminate’s silicon module assembly base.

The third major module production area in 2026 comes from a specific group of states in the Southeast – South Carolina, North Carolina, Georgia and Alabama. Volumes are dominated by Qcells in Dalton and Cartersville, Georgia, First Solar in Alabama, and Inox Clean Energy’s at the former Boviet Solar site in North Carolina. A further seven companies across South Carolina, Georgia and Alabama are also producing modules in 2026.

Industry leaders

While nameplate capacity announcements and aspirations have been covered extensively in the United States since the introduction of the Inflation Reduction Act, manufacturing activity is best understood through analyzing the capex and production output from company-specific manufacturing plants – the basis of a new methodology developed by Terawatt PV Research to benchmark and rate US solar manufacturers.

The methodology behind company-specific rankings (overall manufacturing strength scores) and ratings (from AAA-rated to C-rated) involves weighted analysis of production volumes and manufacturing capex and a minimum threshold, followed by normalization and z-score analysis.

The ratings pyramid (left) for the third quarter of 2026 highlights the importance of companies in the United States that are active across more than one stage of the value-chain. First Solar is the only company to feature in the top AAA-rated band, with its thin-film manufacturing process flow equal to the whole silicon-based value-chain.

Corning is AA-rated, mainly through its polysilicon, ingot, wafer and module operations in Michigan and Arizona. Canadian Solar is the other AA-rated company with meaningful production and capex contributions from its module base in Texas and cell plant in Indiana.

Across the lower B- and C-rating bands, companies are generally pure-play module producers, such as SEG Solar, Illuminate and Waaree Energies, or focused on cell manufacturing, such as Suniva and ES Foundry.

As more silicon-based companies backward integrate from module to cell production, a greater number will feature in the A to AAA-rated bands from 2027 onwards. The pyramid will also see changes next year as legacy site contributions in 2026 from JinkoSolar and Boviet Solar transition to new owners. In particular, Inox Clean Energy is expected to see a strong upward tick once Boviet’s new cell factory is sold to Inox in 2027.

Expectations for 2027

With module-based capex having dominated the domestic solar investment landscape since 2023, the next stage of onshoring the silicon-based ecosystem will come from new capital released to increase domestic cell production volumes, in addition to building key materials supply options for module production (including encapsulant films, backsheets, glass and frames).

Ultimately, the long-term success of a domestic solar ecosystem in the United States will not simply come from a group of leading companies committing capex and running factories at high production volumes, but by the operations being profitable with a stable policy outlook. If this can be achieved, there is every chance that a US solar manufacturing industry could become a reality.

The post The US solar manufacturing landscape in 2026 appeared first on pv magazine Global.

What's Your Reaction?

Like Like 0
Dislike Dislike 0
Love Love 0
Funny Funny 0
Wow Wow 0
Sad Sad 0
Angry Angry 0

Comments (0)

User