SolarEdge debuts dual-module power optimizer
SolarEdge unveiled its new U.S.-made Duo power optimizer for commercial and industrial (C&I) solar projects this week at RE+ 2026 in Las Vegas.
Power optimizers are DC-to-DC converters installed on the underside of solar modules to maximize power output. Unlike conventional optimizers, which typically connect to a single module, the SolarEdge Duo connects to two modules, with an independent maximum power point tracker (MPPT) for each.
According to the company’s datasheet, each input supports up to 650 W, with an MPPT operating voltage range of 12.5 V to 57 V and a maximum continuous input current of 20 A. The optimizer has a maximum output voltage of 80 V, a maximum output current of 20 A and a weighted efficiency of 98.8%.

SolarEdge said the dual-module design reduces the number of optimizers required by 50% compared with its C651U model. Each optimizer features a short pair of wires for the nearest module and a pre-extended pair for the adjacent module, reducing cable slack and eliminating the need for field-installed jumpers. The Duo also supports dual-tilt racking configurations, allowing it to connect modules facing different directions.
The device measures 129 mm x 159 mm x 59 mm and weighs 1.2 kg, including cables. It has an IP68/NEMA 6P protection rating and an operating temperature range of -40 C to 85 C, with power derating above 65 C. The optimizer supports a maximum system voltage of 1,000 V and is compatible with specified SolarEdge commercial three-phase inverters.
The Duo features SolarEdge’s optimizer-level arc fault detection technology, which uses each optimizer as an arc sensor as part of the company’s arc fault circuit interruption (AFCI) system. According to SolarEdge, this enables arc faults to be detected closer to their source rather than solely at the inverter. If one optimizer fails to detect an arc, a neighboring optimizer can detect it, the company said. The system reportedly provides protection for strings with a total cable length of up to 1,000 meters between the inverter and optimizers.

SolarEdge reports that its Sense Connect technology also monitors temperature at every input and output connector to identify developing faults.
The Duo comes with a 25-year warranty. Manufactured in Florida, it is designed to meet U.S. Domestic Content and Foreign Entity of Concern (FEOC) requirements.
The Duo power optimizer is available to order now in the U.S. through SolarEdge sales channels and distribution partners, with shipments expected to begin in January 2027. SolarEdge is showing the Duo this week at RE+ in booth N1516.
The post SolarEdge debuts dual-module power optimizer appeared first on pv magazine Global.
What's Your Reaction?
Like
0
Dislike
0
Love
0
Funny
0
Wow
0
Sad
0
Angry
0
Comments (0)